現在天氣變好了復工的也越來越多了，攪拌車也要開始工作了但是現在天氣越來越熱了，由于環境的溫度會給裝載機的使用帶來困難，但是我們在高溫的狀態下應該做好那些使用防護技術呢？這樣不僅可以操作可以增加裝載機的使用壽命。

Now the weather is getting better, more and more people are returning to work, and the mixer truck is going to start working, but now the weather is getting hotter and hotter. The temperature of the environment will bring difficulties to the use of the loader, but what safety protection technologies should we do in the high temperature state? This can not only operate safely, but also increase the service life of the loader.

1.進入高溫之后我們應該有針對性的對潤滑系統的各個部件做一次性能檢測，以使機油壓力表、變速箱壓力表指示準確。對變速箱、變距器和驅動橋內的油液進行一次系統的檢查，從油液的品質到油液的數量，并要保持油液清潔。

1. After entering the high temperature, we should make a targeted one-time performance test on all parts of the lubrication system to make the oil pressure gauge and transmission pressure gauge indicate accurately. Carry out a systematic inspection of the oil in the transmission, distance converter and drive axle, from the quality of the oil to the quantity of the oil, and keep the oil clean.

2.經常檢查整機的制動效能，以便及早發現并排除制動系統存在的故障，減少事故穩患。長時間的作業使用制動，使制動轂和制動片的溫度過高，制動性能下降，應該立即停車降溫，以免給整機作業帶來隱患。但絕不允許用冷水沖澆制動器來強制降溫。

2. Regularly check the braking efficiency of the whole machine, so as to find and eliminate the faults of the braking system as soon as possible and reduce the stability of accidents. If the brake is used for long-term operation, the temperature of the brake hub and brake pad will be too high and the braking performance will be reduced. Stop the vehicle immediately to reduce the temperature, so as not to bring hidden dangers to the operation safety of the whole machine. However, it is not allowed to use cold water to pour the brake to force the temperature to drop.

3.檢查水泵一風扇傳動皮帶，皮帶經長期使用后，皮帶會產生疲勞、變形，降低冷卻效果。皮帶更換時，要注意型號和長度，并正確調整其松緊度。檢查水箱連接膠管，水箱的膠管的耐油性比較差，容易早期損壞，從而影響供水量，引起發動機溫度升過高。檢查有破裂和漏水現象，要及時排除。同時要保持足量的冷卻水，發現不足要及時添加。

3. Check the water pump fan drive belt. After long-term use, the belt will be tired and deformed, reducing the cooling effect. When replacing the belt, pay attention to the model and length, and correctly adjust its tightness. Check the connecting hose of the water tank. The hose of the water tank has poor oil resistance and is easy to be damaged early, thus affecting the water supply and causing excessive engine temperature rise. Cracks and water leaks should be eliminated in time. At the same time, sufficient cooling water should be maintained and added in time if insufficient.

4.一旦混凝土攪拌車出現過熱的情況，業主應該得到一個很酷的陰涼處停車,讓發動機怠速運行，解除罩加速冷卻，當溫度下降時，然后加入足夠的水來。通常情況下，業主還應定期檢查冷卻系統，和看看水箱缺水。長驅動器或驅動器很長一段時間，但也要注意水溫表讀數的方向。

4. Once the concrete mixer truck overheats, the owner should get a cool shade to stop, let the engine idle, remove the hood to speed up the cooling, and then add enough water when the temperature drops. Generally, the owner should also regularly check the cooling system and check the water tank for water shortage. Long drive or drive for a long time, but also pay attention to the direction of the water temperature gauge reading.

以上4點就是今天小編講解關于攪拌車高溫下使用防護技術相關內容，希望以上文章可以幫助到大家，大家要是有什么不明白的地方大家可以向我們留言或者關注網站http://www.qirongguanjia.cn進行咨詢，看到之后我們會立即與大家進行解答。

The above four points are the content about the safe use and protection technology of mixer truck under high temperature explained by the editor today. I hope the above article can help you. If you have any questions, you can leave a message to us or follow the website http://www.qirongguanjia.cn We will consult with you immediately after seeing it.