If used for a long time, the oil seal will be worn. Solution: just replace the new oil seal.
如果長時間不更換機油，則濾芯的質量會(huì )下降，機油會(huì )變得太臟，并且油封的磨損會(huì )更快。方案：盡快更換液壓油和濾芯。
If the oil is not changed for a long time, the quality of the filter element will decline, the oil will become too dirty, and the oil seal will wear faster. Solution: change the hydraulic oil and filter element as soon as possible.
驅動軸失衡并劇烈振動，導致主軸擺動油封磨損。方案：及時固定并更換軸。
The unbalance and violent vibration of the drive shaft lead to the wear of the spindle swing oil seal. Solution: fix and replace the shaft in time.
液壓油會(huì )變質和乳化，降低潤滑性能并加速油封的磨損。方案：盡快更換液壓油和濾芯。在嚴重的情況下，需要清潔系統。
Hydraulic oil will deteriorate and emulsify, reduce the lubrication performance and accelerate the wear of oil seal. Solution: change the hydraulic oil and filter element as soon as possible. In severe cases, the system needs to be cleaned.
泵支架松動，泵打開，泵固定螺栓松動，導致整個液壓泵振動并磨損油封。方案：始終檢查并全自動上料一體攪拌車發生故障的可能性，以防止并避免發生故障。
The pump bracket is loose, the pump is opened, and the fixing bolts of the pump are loose, which leads to the vibration of the whole hydraulic pump and the wear of the oil seal. Solution: always check and eliminate the possibility of failure of fully automatic feeding integrated mixer to prevent and avoid failure.
自動上料一體攪拌車系統的回油不暢，回油管和散熱器堵塞，導致電動機殼體內的壓力升高，并且油封泄漏。方案：堵塞物并穩定回油回路。
The oil return of the automatic feeding integrated mixer system is not smooth, and the oil return pipe and radiator are blocked, which leads to the pressure rise in the motor housing and the oil seal leakage. Solution: remove the blockage and stabilize the oil return circuit.
如果散熱器不散熱，油的溫度將變得太高，粘度和潤滑性將降低，油封將過熱并且密封將無法工作。
If the radiator does not dissipate heat, the temperature of the oil will become too high, the viscosity and lubricity will be reduced, the oil seal will overheat and the seal will not work.
方案：散熱器上的障礙物并冷卻系統，以防止泵馬達磨損。在嚴重的情況下，有必要停止和停止發動機，并用水沖洗泵的電動機和散熱器殼體以達到冷卻效果。
Solution: remove the obstacles on the radiator and cool the system to prevent the pump motor from wearing. In severe cases, it is necessary to stop and stop the engine and flush the pump motor and radiator housing with water to achieve cooling effect.
在冬季運行期間，由于預熱不足，油溫過低，油封和油封無法達到理想的工作溫度。對策：?jiǎn)?dòng)時停止油箱，以怠速運轉1020分鐘，并在機油溫度恢復正常時更換油箱。
During the winter operation, due to insufficient preheating and low oil temperature, the oil seal and oil seal can not reach the ideal working temperature. Countermeasures: stop the oil tank when starting, run at idle speed for 10 to 20 minutes, and replace the oil tank when the oil temperature returns to normal.
自動上料一體攪拌車的液壓泵軸端的油封很脆弱。嚴格遵守相關法規可以有效防止許多機油泄漏。如果遇到漏油，則需要冷靜下來并確定問題的具體原因。
The oil seal of the hydraulic pump shaft end of the automatic feeding integrated mixer is very fragile. Strict compliance with relevant regulations can effectively prevent many oil leakage. In case of oil leakage, you need to calm down and determine the specific cause of the problem.
以上內容是由全自動攪拌車友情提供，更多的精彩請點擊：http://www.qirongguanjia.cn我們堅持誠信為本的經營綱領，歡迎您的合作!
The above content is provided by the automatic mixer, more wonderful please click: http://www.qirongguanjia.cn We adhere to the integrity-based business philosophy, welcome your cooperation!
