Park the self loading concrete mixer on a horizontal surface and tighten the handbrake.
2、讓發動機怠速作業幾分鐘。
Let the engine idle for a few minutes.
3、踩下制動踏板，將操縱桿轉倒檔，前進檔等，并在每個檔上停留幾秒鐘，以向變矩器和所有換檔執行器注滿液壓油，終將操縱桿轉到停車方位。
Press the brake pedal, turn the lever to reverse, forward, etc., and stay in each gear for a few seconds to fill the torque converter and all shift actuators with hydraulic oil, and finally turn the control lever to the parking position.
4、從加油管上取下自動變速箱油尺，將清潔過的油尺插入加油管，然后將其拉出以檢查油尺上的油位。
Remove the automatic transmission dipstick from the filler tube, insert the cleaned dipstick into the filler tube and pull it out to check the oil level on the dipstick.
5.在檢查自上料混凝土攪拌車或?qū)ζ溥M行缺點排除之前，請先檢查變速箱油位和油質。將變速桿置于P方位，在空轉時作業發動機少幾分鐘，油液抵達正常的作業溫度，并且車輛有停放在水平表面上，以確保差速器和油門之間的油位。傳輸通常是安穩的。
Please check the oil level and oil quality of the gearbox before checking or eliminating the shortcomings of the self loading concrete mixer. Place the shift lever in the P position, operate the engine at idle for at least a few minutes, the oil reaches the normal operating temperature, and the vehicle is parked on a horizontal surface to ensure the oil level between the differential and the throttle. Transmission is usually secure.
