One light: when the self loading concrete mixer works, the heel is close to the road surface of the cab, the sole plate and the accelerator are kept flat, and the oil pedal is gently pressed.
二穩：自上料式混凝土攪拌車在工作中，油門一直要保持穩定。一般作業狀態下，油門開啟度在百分之七十上下為宜。
Two stable: since the feeding type concrete mixer in the work, the throttle has to be stable. Under normal working conditions, the throttle opening should be around 70%.
三離：在自上料式混凝土攪拌車工作時，腳底板應該和剎車踏板分離開，平放進駕駛室路面上，不能踩在剎車踏板上。自上料式混凝土攪拌車經常在凸凹不平的工地工作，假如腳一直踩在剎車踏板上，機身上下竄動會導致司機不輕意地踩剎車踏板。一般狀況下，要用調節油門降速的方式控制機況和換檔。如此既防止了經常剎車導致剎車系統太熱，又為自上料式混凝土攪拌車快速的加速提供便捷。
Three separation: when the self loading concrete mixer is working, the sole plate should be separated from the brake pedal, and should be placed flat on the road of the cab instead of stepping on the brake pedal. The self loading concrete mixer often works on uneven construction sites. If the foot is always on the brake pedal, the body will move up and down, which will cause the driver to step on the brake pedal carelessly. In general, the way of adjusting the throttle speed down is used to control the engine condition and shift. The utility model provides a quick braking system for the concrete mixing truck, which is convenient for the concrete mixing truck to accelerate.
四勤：在自上料式混凝土攪拌車工作時，特別是在鏟挖工作時，應在油門穩定狀況下，用循環系統轉動起升和轉斗操縱桿的方式使鏟斗鏟滿材料。起升和轉斗操縱杠的循環系統轉動便是所講的“勤”。這個流程十分關鍵，對耗油量的干擾非常大。
Si Qin: when the self loading concrete mixer is working, especially when the shovel is working, the bucket shall be filled with materials by the way of rotating the lifting and rotary bucket control lever of the circulating system under the condition of stable accelerator. The circulation system of lifting and rotating bucket control lever is called "diligence". This process is very critical and has a great impact on fuel consumption.
五協調：協調便是起升和轉斗操縱杠巧妙的相互配合。自上料式混凝土攪拌車一般的鏟挖流程首要是將鏟斗平放到路面，穩定地駛往料堆。在鏟斗持平鏟往料堆遇到阻力時，首要應遵照先起臂后收斗的標準。如此可以合理地防止鏟斗底端受到阻力，進而可以充分運用較大的掘起力。
Five coordination: coordination is the ingenious cooperation between lifting and bucket control lever. The general shoveling process of self loading concrete mixer is to put the bucket flat on the road and drive steadily to the material pile. When the bucket is flat and there is resistance when shoveling to the material pile, the standard of lifting the arm first and then retracting the bucket should be followed. In this way, the resistance at the bottom of the bucket can be reasonably prevented, and the larger digging force can be fully used.
六禁止：首要是禁止車胎跑偏。自上料式混凝土攪拌車工作時，遇到阻力而猛給油門一般會發生車胎跑偏的狀況。這類狀況一般是因為司機實際操作不善導致的，既提升了耗油量又損害了車胎。此外是禁止后輪翹起來。因為自上料式混凝土攪拌車的掘起力大，司機一般在鏟挖堅實的原土和石料山等工作流程中，假如實際操作不善就非常容易發生兩后輪翹起來離地狀況。
Six prohibitions: the first is to prohibit tire deviation. When the self loading concrete mixer works, when it encounters resistance and gives the accelerator fiercely, the tire will generally deviate. This kind of situation is generally caused by the improper operation of the driver, which not only increases the fuel consumption, but also damages the tire. In addition, it is forbidden to turn up the rear wheels. Because of the great digging force of the self loading concrete mixer, the driver is usually in the process of digging solid original soil and stone hill. If the actual operation is not good, it is very easy to cause the two rear wheels to tilt up and leave the ground.
此文是由小型混凝土攪拌車今天為您提供的精彩內容，更多的精彩內容請點擊進入網站http://www.qirongguanjia.cn進行查看，更多的精彩內容可點擊相關的頁面查看.
This article is a wonderful content provided by small concrete mixer for you today. For more wonderful content, please click to enter the website http://www.qirongguanjia.cn To view, more wonderful content can click on the relevant page to view
